Tag archive for "Environmental"

Slips, Trips, and Falls

OSHA Buzz

Slips, Trips, and Falls

2 Comments 24 May 2010

From osha.gov

OSHA News Release: 10-606-NAT
May 24, 2010
Contact Name: Diana Petterson    Jason Surbey
Phone Number: 202-693-1898    202-693-4668
E-mail: petterson.diana@dol.gov surbey.jason@dol.gov

US Labor Department’s OSHA publishes proposed rulemaking
to prevent injuries from slips, trips and falls on walking-working surfaces

WASHINGTON — The U.S. Department of Labor’s Occupational Safety and Health Administration has announced in a notice of proposed rulemaking published in today’s Federal Register its plans to require improved worker protection from tripping, slipping and falling hazards on walking and working surfaces. A public hearing on the revised changes will be held after the public comment period for the NPRM.

“This proposal addresses workplace hazards that are a leading cause of work related injuries and deaths,” said Assistant Secretary of Labor for OSHA Dr. David Michaels.

The NPRM describes revisions to the Walking-Working Surfaces and Personal Protective Equipment standards to help prevent an estimated annual 20 workplace fatalities and more than 3,500 injuries serious enough to cause people to miss work. For example, in July 2009, a worker at a chocolate processing plant was killed after falling from an unguarded work platform.

“This is a clear and grave example of the human cost incurred when fall protection safeguards are absent, ignored or inadequate,” said Michaels. “The loss of a worker’s life might have been prevented if the protective measures in these revised standards had been in place and in use.”

The current walking-working surfaces regulations allow employers to provide outdated and dangerous fall protection equipment such as lanyards and body belts that can result in workers suffering greater injury from falls. Construction and maritime workers already receive safer, more effective fall protection devices such as self-retracting lanyards and ladder safety and rope descent systems, which these proposed revisions would also require for general industry workers.

The current walking-working surfaces standards also do not allow OSHA to fine employers who let workers climb certain ladders without fall protection. Under the revised standards, this restriction would be lifted in virtually all industries, allowing OSHA inspectors to fine employers who jeopardize their workers’ safety and lives by climbing these ladders without proper fall protection.

More information is available in the Federal Register notice at http://s.dol.gov/3J.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to assure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.

Click here for more OSHA BUZZ

Nominate OSHA Advisers!

Featured, OSHA Buzz

Nominate OSHA Advisers!

1 Comment 24 May 2010

From osha.gov

May 24, 2010
Contact: Office of Communications
Phone: 202-693-1999

OSHA seeks members to serve on committee for improving construction workers’ safety, health

WASHINGTON — OSHA is accepting nominations for individuals to serve on the Advisory Committee on Construction Safety and Health (ACCSH). The group advises the Secretary of Labor on developing safety and health standards and policies that affect the safety and health of construction workers and the construction industry.

Established as a continuing advisory committee under the Construction Safety Act of 1969, ACCSH and the Assistant Secretary of Labor for OSHA have consulted for nearly 40 years on construction safety issues such as women in construction, recordkeeping, crane safety, and safety and health resources for Latino construction workers.

OSHA is seeking nominees with experience and expertise in construction-related safety and health issues to fill two employee, two employer, one state safety and health agency, and two public representative vacancies. All 15 members serve two year terms, except the representative designated by the Department of Health and Human Services and appointed by the Secretary of Labor, who serves indefinitely. ACCSH meets two to four times a year.

Nominations may be submitted at www.regulations.gov, the Federal eRulemaking Portal. If submitting nominations by mail, send to the OSHA Docket Office, Docket No. OSHA-2010-0005, U.S. Department of Labor, N-2625, 200 Constitution Ave., N.W., Washington, DC 20210. Nominations not exceeding 10 pages may be faxed to 202-693-1648. The deadline for submissions is June 14, 2010.

General inquiries should be directed to Michael Buchet, OSHA Office of Construction Services, at 202-693-2020. Press inquiries should be directed to Jennifer Ashley, OSHA Office of Communications, at 202-693-1999.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to assure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.

Click here for more OSHA BUZZ

? of the Week! May 19th

Featured, Safety

? of the Week! May 19th

3 Comments 18 May 2010

Ok, I know I disappeared for a few days and I am doing fine…I have just been super busy with work.  In fact, where I work was recommended for VPP Star certification last week and the auditors had very positive feedback on our facility.  At one point last Wednesday we had 17 vpp representatives / compliance officers in the facility!  All good though, so here is my question.  We reached a goal last week being recommended as a Star site, what is your goal for your facility this year?

Ergo Tips by Dr. Lee

Ergonomics, Featured

Ergo Tips by Dr. Lee

1 Comment 06 May 2010

Dr. Lee the creator of the ergonomic pen – the UGLee Pen – puts great ergonomic tips on this Twitter page http://twitter.com/ugleepen.  Here are 7 great tips and make sure you follow Dr. Lee @UGLeePen!

  1. Ergonomic back tip: Use your whole body for turning instead of twisting your spine when lifting heavy objects.
  2. Ergonomic back tip: Choose a chair that provides maximum comfort when sitting all the way back against the backrest.
  3. Ergonomic tip: At the computer your upper arms & elbows should be close to the body (not extended outward)
  4. Ergonomic tip: At the computer, your trunk should be perpendicular to floor (may lean back into backrest but not forward)
  5. Ergonomic tip: At the computer, your head & neck to be upright, or in-line with the torso (not bent down/back)
  6. Ergonomic stretching can help ease the stiffness of your major muscle groups. Stand up and try it now.
  7. Ergonomic tip: At the computer, your head, neck, & trunk should face forward (not twisted)

Today in EHS Weekly Digest

Find Me On

© 2012 todayinehs.com. Powered by Wordpress.

Daily Edition Theme by WooThemes - Premium Wordpress Themes

Environment Blogs